ams
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AS1367-BTDT-30
詳細を表示 DataSheets

AS1367-BTDT-30

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - High efficiency - Low dropout voltage - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection

Package: TO-220

Essence: AS1367-BTDT-30 is a voltage regulator IC designed to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity: Typically sold in reels or tubes containing 50 units per package.

Specifications

  • Input Voltage Range: 2.5V - 16V
  • Output Voltage Range: 1.25V - 13.8V
  • Maximum Output Current: 3A
  • Dropout Voltage: 0.35V @ 3A
  • Quiescent Current: 10mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

AS1367-BTDT-30 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. ADJ (Adjustment Pin)

Functional Features

  • High Efficiency: The AS1367-BTDT-30 offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage of 0.35V at 3A, it can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Adjustable Output Voltage: The output voltage can be adjusted using an external resistor connected to the ADJ pin.
  • Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
  • Thermal Shutdown Protection: It includes thermal shutdown protection, preventing damage due to excessive heat.

Advantages and Disadvantages

Advantages: - High efficiency results in minimal power loss. - Adjustable output voltage allows flexibility in various applications. - Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages: - Dropout voltage may limit its use in low voltage applications. - Quiescent current of 10mA may be relatively high for some battery-powered devices.

Working Principles

AS1367-BTDT-30 operates as a linear voltage regulator. It uses a pass transistor to regulate the output voltage based on the difference between the input and desired output voltage. The internal circuitry ensures a stable output voltage by adjusting the pass transistor accordingly.

Detailed Application Field Plans

The AS1367-BTDT-30 is commonly used in various electronic devices that require a stable and regulated power supply. Some typical application fields include:

  1. Consumer Electronics: Used in audio/video equipment, gaming consoles, and portable devices.
  2. Automotive: Provides regulated power for automotive electronics such as infotainment systems and lighting controls.
  3. Industrial Automation: Used in control systems, motor drives, and power supplies.
  4. Telecommunications: Provides regulated power for communication devices like routers, switches, and base stations.

Detailed and Complete Alternative Models

  1. LM317: A popular adjustable voltage regulator with similar characteristics.
  2. LT1085: Offers higher output current capability and lower dropout voltage.
  3. LM1117: Low dropout voltage regulator suitable for low voltage applications.

These alternative models provide similar functionality and can be considered as alternatives to AS1367-BTDT-30 depending on specific requirements.

Word count: 409 words

技術ソリューションにおける AS1367-BTDT-30 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AS1367-BTDT-30 in technical solutions:

  1. Q: What is AS1367-BTDT-30? A: AS1367-BTDT-30 is a technical specification or standard that defines the requirements for a specific component or system.

  2. Q: What does BTDT stand for in AS1367-BTDT-30? A: BTDT stands for "Built to Design and Test."

  3. Q: How is AS1367-BTDT-30 applied in technical solutions? A: AS1367-BTDT-30 is used as a reference document to ensure that the technical solution meets the specified requirements and standards.

  4. Q: What are the key features of AS1367-BTDT-30? A: The key features of AS1367-BTDT-30 include design specifications, testing procedures, performance criteria, and quality assurance guidelines.

  5. Q: Is AS1367-BTDT-30 applicable to all technical solutions? A: No, AS1367-BTDT-30 is specific to a particular component or system and may not be applicable to all technical solutions.

  6. Q: How can I obtain a copy of AS1367-BTDT-30? A: You can obtain a copy of AS1367-BTDT-30 from the relevant standards organization or by purchasing it online.

  7. Q: Can AS1367-BTDT-30 be customized for specific projects? A: In some cases, certain sections of AS1367-BTDT-30 can be customized to meet the specific requirements of a project.

  8. Q: Are there any alternative standards to AS1367-BTDT-30? A: Yes, there may be alternative standards or specifications that can be used instead of AS1367-BTDT-30, depending on the specific industry or application.

  9. Q: How often is AS1367-BTDT-30 updated? A: The frequency of updates to AS1367-BTDT-30 depends on the standards organization responsible for maintaining it. It is typically updated periodically to incorporate new technologies and industry advancements.

  10. Q: Can I use AS1367-BTDT-30 as a legal requirement in technical solutions? A: The use of AS1367-BTDT-30 as a legal requirement depends on the regulations and standards enforced by the relevant authorities in your jurisdiction. It is important to consult with legal experts to determine its applicability in your specific case.

Please note that the specific questions and answers may vary depending on the context and industry in which AS1367-BTDT-30 is being applied.