Allegro MicroSystems, LLC
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ACS712ELCTR-20A-T
詳細を表示 DataSheets

ACS712ELCTR-20A-T

Introduction

The ACS712ELCTR-20A-T is a current sensor belonging to the category of integrated circuits. It is commonly used for measuring AC or DC current in various electronic applications. This device possesses unique characteristics and comes in a specific package, making it an essential component in many electrical systems.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Measuring AC or DC current
  • Characteristics: High accuracy, low noise, small form factor
  • Package: Surface Mount Device (SMD)
  • Essence: Current sensing for electronic applications
  • Packaging/Quantity: Typically available in reels of 2500 units

Specifications

  • Operating Voltage: 5V
  • Current Sensing Range: ±20A
  • Output Voltage: VCC/2 at no current flow
  • Bandwidth: 80kHz
  • Output Type: Analog voltage proportional to current

Detailed Pin Configuration

The ACS712ELCTR-20A-T has a standard pin configuration with three pins: 1. VCC: Power supply input 2. OUT: Analog output proportional to the sensed current 3. GND: Ground connection

Functional Features

  • High accuracy and linearity
  • Low-noise output signal
  • Small form factor for easy integration
  • Overcurrent detection capability

Advantages and Disadvantages

Advantages

  • Accurate current measurement
  • Wide current sensing range
  • Compact size
  • Suitable for both AC and DC current measurement

Disadvantages

  • Limited to a maximum current of ±20A
  • Requires external circuitry for precise measurements at lower currents

Working Principles

The ACS712ELCTR-20A-T utilizes the Hall effect to measure current. When current flows through the sensor, it generates a magnetic field that is sensed by the Hall-effect sensor within the device. This results in a proportional output voltage, which can be further processed to determine the current magnitude.

Detailed Application Field Plans

This current sensor finds extensive use in various applications, including: - Motor control systems - Power supplies - Battery management systems - Inverters and converters - Industrial automation

Detailed and Complete Alternative Models

  1. ACS712ELCTR-05B-T: Lower current sensing range of ±5A
  2. ACS712ELCTR-30A-T: Higher current sensing range of ±30A
  3. ACS723LLCTR-20AU-T: Ultra-low current sensing range of ±20A with improved sensitivity

In conclusion, the ACS712ELCTR-20A-T is a versatile current sensor with high accuracy and a wide range of applications. Its compact design and reliable performance make it a popular choice for engineers and designers working on various electronic projects.

[Word Count: 443]

技術ソリューションにおける ACS712ELCTR-20A-T の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the ACS712ELCTR-20A-T?

    • The ACS712ELCTR-20A-T is a current sensor IC that can measure both AC and DC current up to 20A.

  2. How does the ACS712ELCTR-20A-T work?

    • It utilizes the Hall effect to measure the magnetic field generated by the current flowing through the conductor, providing an analog voltage output proportional to the current.

  3. What are the typical applications of the ACS712ELCTR-20A-T?

    • It is commonly used in applications such as overcurrent protection, battery management systems, power supplies, and motor control.

  4. What is the operating voltage range of the ACS712ELCTR-20A-T?

    • The operating voltage range is typically between 4.5V and 5.5V.

  5. What is the output sensitivity of the ACS712ELCTR-20A-T?

    • The output sensitivity is 100mV/A, meaning that for every ampere of current passing through the sensor, the output voltage will increase by 100mV.

  6. Is the ACS712ELCTR-20A-T suitable for measuring both AC and DC currents?

    • Yes, it is designed to accurately measure both AC and DC currents.

  7. What is the accuracy of the ACS712ELCTR-20A-T?

    • The typical accuracy is around ±1.5%.

  8. Can the ACS712ELCTR-20A-T be used for bidirectional current measurement?

    • Yes, it can measure current flow in both directions.

  9. What is the temperature range for operation of the ACS712ELCTR-20A-T?

    • The typical operating temperature range is from -40°C to 85°C.

  10. Are there any precautions to consider when using the ACS712ELCTR-20A-T?

    • It is important to ensure proper isolation and protection against overvoltage to prevent damage to the sensor. Additionally, careful PCB layout and noise reduction techniques should be employed for accurate measurements.