S-8521D18MC-BXDT2G
Product Overview
Category
S-8521D18MC-BXDT2G belongs to the category of voltage regulators.
Use
This product is primarily used for regulating and stabilizing voltage levels in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-8521D18MC-BXDT2G comes in a compact surface-mount package, making it suitable for various applications.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring the proper functioning of electronic devices.
Packaging/Quantity
The S-8521D18MC-BXDT2G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.8V
- Output Current: Up to 500mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 50µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-8521D18MC-BXDT2G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: The S-8521D18MC-BXDT2G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
- Thermal shutdown protection: In case of excessive temperature rise, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance of electronic circuits.
- Low dropout voltage minimizes power loss and extends battery life.
- Wide input voltage range allows compatibility with various power sources.
- Overcurrent and thermal shutdown protection enhance device safety.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Higher cost compared to basic linear regulators.
Working Principles
The S-8521D18MC-BXDT2G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.
Detailed Application Field Plans
The S-8521D18MC-BXDT2G finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to the S-8521D18MC-BXDT2G include: - S-8521D18MC-BXDT1G - S-8521D18MC-BXDT3G - S-8521D18MC-BXDT4G
These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable option for specific requirements.
Word count: 400 words
技術ソリューションにおける S-8521D18MC-BXDT2G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-8521D18MC-BXDT2G in technical solutions:
1. What is the S-8521D18MC-BXDT2G? - The S-8521D18MC-BXDT2G is a voltage detector IC (integrated circuit) that monitors the voltage level of a power supply and provides an output signal when the voltage exceeds or falls below a certain threshold.
2. What is the operating voltage range of S-8521D18MC-BXDT2G? - The operating voltage range of S-8521D18MC-BXDT2G is typically between 1.6V and 6.0V.
3. How does S-8521D18MC-BXDT2G help in technical solutions? - S-8521D18MC-BXDT2G helps in technical solutions by providing a reliable and accurate voltage monitoring solution, ensuring proper operation and protection of electronic circuits.
4. What is the output format of S-8521D18MC-BXDT2G? - The output format of S-8521D18MC-BXDT2G is a digital signal, which can be easily interfaced with microcontrollers or other digital logic circuits.
5. Can S-8521D18MC-BXDT2G be used for overvoltage protection? - Yes, S-8521D18MC-BXDT2G can be used for overvoltage protection by setting the appropriate threshold voltage. When the input voltage exceeds this threshold, the output signal will indicate an overvoltage condition.
6. Is S-8521D18MC-BXDT2G suitable for battery-powered applications? - Yes, S-8521D18MC-BXDT2G is suitable for battery-powered applications as it has a low quiescent current consumption, which helps in conserving battery power.
7. Can S-8521D18MC-BXDT2G be used for undervoltage detection? - Yes, S-8521D18MC-BXDT2G can be used for undervoltage detection by setting the appropriate threshold voltage. When the input voltage falls below this threshold, the output signal will indicate an undervoltage condition.
8. What is the response time of S-8521D18MC-BXDT2G? - The response time of S-8521D18MC-BXDT2G is typically around 200 microseconds, making it suitable for fast voltage monitoring applications.
9. Does S-8521D18MC-BXDT2G have any built-in hysteresis? - Yes, S-8521D18MC-BXDT2G has built-in hysteresis, which helps in preventing oscillations or false triggering of the output signal when the input voltage is near the threshold level.
10. Is S-8521D18MC-BXDT2G available in different package options? - Yes, S-8521D18MC-BXDT2G is available in different package options, such as SOT-23-5 and USP-6C, providing flexibility in design and integration into various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidance.