S-8353A50MA-IRJT2G
Product Overview
Category
The S-8353A50MA-IRJT2G belongs to the category of voltage regulators.
Use
This product is commonly used in electronic devices to regulate and stabilize voltage levels.
Characteristics
- High efficiency: The S-8353A50MA-IRJT2G offers high efficiency, ensuring minimal power loss during voltage regulation.
- Low dropout voltage: It has a low dropout voltage, allowing it to operate even when the input voltage is close to the output voltage.
- Compact package: The product comes in a compact package, making it suitable for space-constrained applications.
- Thermal shutdown protection: It incorporates thermal shutdown protection, preventing damage due to excessive heat.
- Overcurrent protection: The S-8353A50MA-IRJT2G includes overcurrent protection, safeguarding against excessive current flow.
Package and Quantity
The S-8353A50MA-IRJT2G is available in a small surface-mount package. It is typically sold in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 5.0V
- Output Current: 500mA
- Dropout Voltage: 0.15V (typical)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Pin Configuration
The S-8353A50MA-IRJT2G has the following pin configuration:
```
| | --| VIN VOUT |-- --| GND EN |-- |___________| ```
- VIN: Input voltage pin
- VOUT: Output voltage pin
- GND: Ground pin
- EN: Enable pin (used to enable or disable the regulator)
Functional Features
- Voltage regulation: The S-8353A50MA-IRJT2G provides stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It can operate with a minimal voltage difference between the input and output, ensuring efficient power usage.
- Thermal shutdown protection: The product includes thermal shutdown protection, preventing damage from excessive heat.
- Overcurrent protection: It incorporates overcurrent protection, safeguarding against excessive current flow.
Advantages and Disadvantages
Advantages
- High efficiency ensures minimal power loss.
- Compact package suitable for space-constrained applications.
- Thermal and overcurrent protection enhance reliability.
- Low dropout voltage allows operation with low input-output voltage difference.
Disadvantages
- Limited output current capacity (500mA).
- Restricted input voltage range (2.5V - 6.0V).
Working Principles
The S-8353A50MA-IRJT2G operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a stable output voltage even when the input voltage fluctuates.
Detailed Application Field Plans
The S-8353A50MA-IRJT2G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Alternative Models
Below are some alternative models that offer similar functionality:
S-8353A33MA-IRJT2G
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 500mA
S-8353A18MA-IRJT2G
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.8V
- Output Current: 500mA
S-8353A33MC-IRJT2G
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 1A
These alternative models can be considered based on specific application requirements.
In conclusion, the S-8353A50MA-IRJT2G is a voltage regulator with high efficiency, low dropout voltage, and various protection features. It finds application in numerous electronic devices and has alternative models available for different voltage and current requirements.
技術ソリューションにおける S-8353A50MA-IRJT2G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-8353A50MA-IRJT2G in technical solutions:
Q: What is the S-8353A50MA-IRJT2G? A: The S-8353A50MA-IRJT2G is a voltage regulator IC that provides a stable output voltage for various electronic devices.
Q: What is the input voltage range of S-8353A50MA-IRJT2G? A: The input voltage range of S-8353A50MA-IRJT2G is typically between 2.5V and 6.0V.
Q: What is the output voltage of S-8353A50MA-IRJT2G? A: The output voltage of S-8353A50MA-IRJT2G is fixed at 5.0V.
Q: What is the maximum output current of S-8353A50MA-IRJT2G? A: The maximum output current of S-8353A50MA-IRJT2G is 500mA.
Q: Can S-8353A50MA-IRJT2G be used in battery-powered applications? A: Yes, S-8353A50MA-IRJT2G can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.
Q: Is S-8353A50MA-IRJT2G suitable for automotive applications? A: Yes, S-8353A50MA-IRJT2G is suitable for automotive applications as it meets the required automotive standards and has a wide operating temperature range.
Q: Does S-8353A50MA-IRJT2G have overcurrent protection? A: Yes, S-8353A50MA-IRJT2G has built-in overcurrent protection that safeguards the device and the connected circuitry.
Q: Can S-8353A50MA-IRJT2G handle input voltage fluctuations? A: Yes, S-8353A50MA-IRJT2G has excellent input voltage stability and can handle input voltage fluctuations within its specified range.
Q: Is S-8353A50MA-IRJT2G suitable for space-constrained applications? A: Yes, S-8353A50MA-IRJT2G is available in a compact package and is suitable for space-constrained applications.
Q: Are there any application notes or reference designs available for S-8353A50MA-IRJT2G? A: Yes, the manufacturer provides application notes and reference designs to help users integrate S-8353A50MA-IRJT2G into their technical solutions efficiently.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.