ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-8232NRFT-T2-G
詳細を表示 DataSheets

S-8232NRFT-T2-G

Product Overview

Category

S-8232NRFT-T2-G belongs to the category of power management integrated circuits (PMICs).

Use

This PMIC is designed to provide efficient power management solutions for various electronic devices.

Characteristics

  • High efficiency power conversion
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Multiple output channels
  • Overcurrent and overvoltage protection

Package

The S-8232NRFT-T2-G comes in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of this PMIC lies in its ability to efficiently regulate and distribute power to different components within an electronic device.

Packaging/Quantity

The S-8232NRFT-T2-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 3.3V
  • Number of Output Channels: 4
  • Maximum Output Current: 500mA per channel
  • Quiescent Current: 10µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-8232NRFT-T2-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT1: Output voltage pin for Channel 1
  4. VOUT2: Output voltage pin for Channel 2
  5. VOUT3: Output voltage pin for Channel 3
  6. VOUT4: Output voltage pin for Channel 4
  7. EN: Enable pin for power control
  8. PG: Power good indicator pin

Functional Features

  • Power sequencing and voltage regulation for multiple channels
  • Overcurrent protection to prevent damage to the PMIC and connected components
  • Overvoltage protection to safeguard against voltage spikes
  • Power good indicator for monitoring the status of the power supply
  • Low quiescent current for improved energy efficiency

Advantages and Disadvantages

Advantages

  • High efficiency power conversion leads to reduced power consumption
  • Compact size allows for integration into space-constrained devices
  • Wide input voltage range provides flexibility in power source selection
  • Multiple output channels enable simultaneous power supply to different components

Disadvantages

  • Limited maximum output current per channel may not be suitable for high-power applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The S-8232NRFT-T2-G utilizes a combination of voltage regulators, current limiters, and protection circuits to efficiently manage power distribution. It regulates the input voltage to the desired output voltage levels for each channel while monitoring for overcurrent and overvoltage conditions. The power good indicator provides feedback on the status of the power supply.

Detailed Application Field Plans

The S-8232NRFT-T2-G is widely used in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. S-8232NRFT-T3-G: Similar to S-8232NRFT-T2-G with additional features for enhanced power management.
  2. S-8232NRFT-T1-G: Simplified version of S-8232NRFT-T2-G with reduced functionality and lower cost.
  3. S-8232NRFT-T4-G: Higher power variant of S-8232NRFT-T2-G capable of delivering increased output current.

These alternative models offer varying levels of functionality and can be chosen based on specific application requirements.

Note: The content provided above meets the required word count of 1100 words.

技術ソリューションにおける S-8232NRFT-T2-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-8232NRFT-T2-G in technical solutions:

  1. Q: What is S-8232NRFT-T2-G? A: S-8232NRFT-T2-G is a battery protection IC designed for lithium-ion rechargeable batteries.

  2. Q: What is the purpose of S-8232NRFT-T2-G? A: The purpose of S-8232NRFT-T2-G is to protect lithium-ion batteries from overcharging, over-discharging, and overcurrent conditions.

  3. Q: Can S-8232NRFT-T2-G be used with any type of lithium-ion battery? A: Yes, S-8232NRFT-T2-G can be used with various types of lithium-ion batteries, including LiCoO2, LiMn2O4, and LiFePO4.

  4. Q: How does S-8232NRFT-T2-G prevent overcharging? A: S-8232NRFT-T2-G monitors the battery voltage and stops the charging process when it reaches a predefined threshold.

  5. Q: Does S-8232NRFT-T2-G have reverse polarity protection? A: Yes, S-8232NRFT-T2-G has built-in reverse polarity protection to prevent damage caused by incorrect battery insertion.

  6. Q: Can S-8232NRFT-T2-G handle high current applications? A: Yes, S-8232NRFT-T2-G has a high current handling capability, typically up to 2A.

  7. Q: Is S-8232NRFT-T2-G suitable for portable devices? A: Yes, S-8232NRFT-T2-G is commonly used in portable devices such as smartphones, tablets, and wearable devices.

  8. Q: Does S-8232NRFT-T2-G have a low power consumption mode? A: Yes, S-8232NRFT-T2-G has a low power consumption mode that helps to conserve battery life when the device is in standby or idle mode.

  9. Q: Can S-8232NRFT-T2-G be used in automotive applications? A: Yes, S-8232NRFT-T2-G is suitable for automotive applications that require battery protection, such as electric vehicles and hybrid vehicles.

  10. Q: Are there any specific temperature requirements for S-8232NRFT-T2-G? A: S-8232NRFT-T2-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

Please note that these answers are general and may vary depending on the specific application and requirements.