ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-8232NKFT-T2-G

S-8232NKFT-T2-G

Product Overview

Category

S-8232NKFT-T2-G belongs to the category of power management integrated circuits (PMICs).

Use

This PMIC is designed to provide efficient power management solutions for various electronic devices.

Characteristics

  • High efficiency power conversion
  • Low power consumption
  • Compact package size
  • Wide input voltage range
  • Multiple protection features

Package

The S-8232NKFT-T2-G comes in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of this PMIC lies in its ability to efficiently manage power distribution and conversion within electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

The S-8232NKFT-T2-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 3.3V
  • Maximum Output Current: 500mA
  • Quiescent Current: 10µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-8232NKFT-T2-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin
  5. FB: Feedback pin
  6. PG: Power good pin

Functional Features

  • Overvoltage protection
  • Undervoltage lockout
  • Thermal shutdown protection
  • Short-circuit protection
  • Soft-start function
  • Power good output indication

Advantages and Disadvantages

Advantages

  • High efficiency power conversion leads to reduced power consumption
  • Wide input voltage range allows compatibility with various power sources
  • Multiple protection features enhance device reliability
  • Compact package size enables use in space-constrained applications

Disadvantages

  • Maximum output current may not be sufficient for high-power devices
  • Limited output voltage range may not meet the requirements of certain applications

Working Principles

The S-8232NKFT-T2-G utilizes advanced power management techniques to regulate and convert input voltage to the desired output voltage. It employs a combination of switching regulators, voltage references, and control circuitry to achieve efficient power conversion.

Detailed Application Field Plans

The S-8232NKFT-T2-G is suitable for a wide range of applications, including but not limited to: - Portable electronic devices - Wearable devices - IoT devices - Battery-powered systems - Consumer electronics

Detailed and Complete Alternative Models

  1. S-8232MKFT-T2-G
  2. S-8232LKFT-T2-G
  3. S-8232HKFT-T2-G
  4. S-8232JKFT-T2-G

These alternative models offer similar functionality and characteristics, providing flexibility in choosing the most suitable PMIC for specific application requirements.

In conclusion, the S-8232NKFT-T2-G is a highly efficient power management integrated circuit designed for various electronic devices. Its compact size, multiple protection features, and wide input voltage range make it an ideal choice for power management solutions. However, its limited output voltage range and maximum output current may pose limitations in certain applications. Nonetheless, the S-8232NKFT-T2-G, along with its alternative models, offers reliable and efficient power management solutions for a wide range of electronic devices.

技術ソリューションにおける S-8232NKFT-T2-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-8232NKFT-T2-G in technical solutions:

1. What is S-8232NKFT-T2-G? - S-8232NKFT-T2-G is a battery protection IC designed for lithium-ion rechargeable batteries.

2. What is the purpose of using S-8232NKFT-T2-G in technical solutions? - The main purpose of using S-8232NKFT-T2-G is to protect lithium-ion batteries from overcharging, over-discharging, and overcurrent conditions.

3. What are the key features of S-8232NKFT-T2-G? - Some key features of S-8232NKFT-T2-G include overcharge detection voltage, overdischarge detection voltage, overcurrent detection voltage, and short-circuit detection voltage.

4. How does S-8232NKFT-T2-G protect against overcharging? - S-8232NKFT-T2-G monitors the battery voltage and automatically stops the charging process when it reaches the overcharge detection voltage.

5. How does S-8232NKFT-T2-G protect against over-discharging? - S-8232NKFT-T2-G monitors the battery voltage and cuts off the discharge current when it reaches the overdischarge detection voltage.

6. Can S-8232NKFT-T2-G handle high currents? - Yes, S-8232NKFT-T2-G has a high-current handling capability, making it suitable for various applications.

7. Is S-8232NKFT-T2-G compatible with different battery capacities? - Yes, S-8232NKFT-T2-G can be used with different battery capacities as long as they are within the specified voltage range.

8. Can S-8232NKFT-T2-G be used in portable electronic devices? - Yes, S-8232NKFT-T2-G is commonly used in portable electronic devices like smartphones, tablets, and wearable devices.

9. Does S-8232NKFT-T2-G have any built-in thermal protection? - Yes, S-8232NKFT-T2-G has a built-in thermal shutdown function that activates when the IC temperature exceeds a certain threshold.

10. Are there any specific design considerations when using S-8232NKFT-T2-G? - It is important to follow the manufacturer's guidelines and recommendations for PCB layout, component placement, and thermal management to ensure optimal performance of S-8232NKFT-T2-G in technical solutions.

Please note that these questions and answers are general and may vary depending on the specific application and requirements.