ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-8232AHFT-T2-G

S-8232AHFT-T2-G

Product Overview

Category

S-8232AHFT-T2-G belongs to the category of power management integrated circuits (PMICs).

Use

This PMIC is primarily used for battery charging and protection in portable electronic devices.

Characteristics

  • High efficiency charging
  • Overcharge and over-discharge protection
  • Short circuit protection
  • Temperature monitoring and protection
  • Low standby current consumption

Package

The S-8232AHFT-T2-G is available in a compact and industry-standard QFN package.

Essence

The essence of this product lies in its ability to efficiently charge and protect batteries, ensuring safe and reliable operation of portable electronic devices.

Packaging/Quantity

The S-8232AHFT-T2-G is typically packaged in reels containing a specified quantity of units, as per customer requirements.

Specifications

  • Input Voltage Range: 4.35V - 6.0V
  • Charging Current: Up to 1.5A
  • Operating Temperature Range: -40°C to +85°C
  • Standby Current: Less than 0.1µA
  • Battery Overcharge Detection Voltage: 4.25V ± 0.025V
  • Battery Overdischarge Detection Voltage: 2.4V ± 0.08V

Detailed Pin Configuration

The S-8232AHFT-T2-G features the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. BAT: Battery connection
  4. CHG: Charging status output
  5. DSG: Discharging status output
  6. TS: Temperature sense input
  7. CE: Charge enable control input
  8. STAT: Status output

Functional Features

  1. High Efficiency Charging: The S-8232AHFT-T2-G incorporates a highly efficient charging circuit, ensuring faster and more effective battery charging.

  2. Overcharge and Over-discharge Protection: This PMIC includes built-in protection mechanisms to prevent overcharging and over-discharging of the battery, safeguarding it from potential damage.

  3. Short Circuit Protection: The device is equipped with short circuit protection, which automatically shuts off the charging circuit in case of a short circuit, preventing any potential hazards.

  4. Temperature Monitoring and Protection: The S-8232AHFT-T2-G features temperature sensing capabilities, allowing it to monitor the battery temperature and take necessary actions to prevent overheating or extreme temperature conditions.

  5. Low Standby Current Consumption: With a standby current consumption of less than 0.1µA, this PMIC ensures minimal power drain when not actively charging or discharging the battery.

Advantages and Disadvantages

Advantages

  • Efficient charging mechanism
  • Comprehensive protection features
  • Compact package size
  • Low standby current consumption

Disadvantages

  • Limited input voltage range (4.35V - 6.0V)
  • Specific to portable electronic devices

Working Principles

The S-8232AHFT-T2-G operates by regulating the charging current and monitoring the battery voltage and temperature. It controls the charging process to ensure optimal charging efficiency while protecting the battery from overcharging, over-discharging, and excessive temperature conditions.

Detailed Application Field Plans

The S-8232AHFT-T2-G is widely used in various portable electronic devices, including but not limited to: - Smartphones - Tablets - Wearable devices - Portable gaming consoles - Digital cameras

Detailed and Complete Alternative Models

  1. S-8232BHFT-T2-G: Similar to S-8232AHFT-T2-G, but with extended input voltage range (2.5V - 6.0V).
  2. S-8232CHFT-T2-G: Enhanced version with additional features such as battery temperature monitoring and communication interface.

These alternative models offer similar functionality to the S-8232AHFT-T2-G, catering to different application requirements.

In conclusion, the S-8232AHFT-T2-G is a highly efficient PMIC designed for battery charging and protection in portable electronic devices. With its comprehensive features and compact package, it ensures safe and reliable operation of batteries, making it an essential component in various consumer electronics applications.

技術ソリューションにおける S-8232AHFT-T2-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-8232AHFT-T2-G in technical solutions:

  1. Q: What is the S-8232AHFT-T2-G? A: The S-8232AHFT-T2-G is a lithium-ion battery protection IC designed for use in various technical solutions.

  2. Q: What is the purpose of the S-8232AHFT-T2-G? A: The main purpose of this IC is to protect lithium-ion batteries from overcharging, over-discharging, and overcurrent conditions.

  3. Q: Can the S-8232AHFT-T2-G be used in portable electronic devices? A: Yes, it is commonly used in portable electronic devices such as smartphones, tablets, and laptops.

  4. Q: How does the S-8232AHFT-T2-G protect against overcharging? A: The IC monitors the battery voltage and automatically stops the charging process when the voltage reaches a predetermined threshold.

  5. Q: Does the S-8232AHFT-T2-G provide protection against over-discharging? A: Yes, it includes a feature that cuts off the battery output when the voltage drops below a certain level, preventing over-discharging.

  6. Q: Can the S-8232AHFT-T2-G handle high current loads? A: Yes, it has a built-in overcurrent protection circuit that can handle high current loads and prevent damage to the battery.

  7. Q: Is the S-8232AHFT-T2-G compatible with different battery capacities? A: Yes, it is compatible with various lithium-ion battery capacities, making it suitable for a wide range of applications.

  8. Q: Does the S-8232AHFT-T2-G have any temperature protection features? A: Yes, it includes a thermal shutdown function that activates when the IC's temperature exceeds a certain threshold.

  9. Q: Can the S-8232AHFT-T2-G be used in automotive applications? A: Yes, it is suitable for automotive applications where lithium-ion batteries are used, providing essential protection functions.

  10. Q: Is the S-8232AHFT-T2-G easy to integrate into existing circuit designs? A: Yes, it comes in a compact package and has a simple interface, making it relatively easy to integrate into existing circuit designs.

Please note that these answers are general and may vary depending on specific application requirements.