S-8213AAG-I6T1U

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: Low voltage detector with delay circuit
• Package: SOT-23-5
• Essence: Monolithic CMOS IC
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage Range: 1.6V to 6.0V
• Detection Voltage Range: 1.2V to 5.0V (100mV increments)
• Operating Temperature Range: -40°C to +85°C
• Quiescent Current: 1.0µA (typical)

Detailed Pin Configuration

The S-8213AAG-I6T1U has a total of 5 pins: 1. VDD: Supply voltage input 2. GND: Ground reference 3. OUT: Output pin for detection signal 4. EN: Enable pin for controlling the IC's operation 5. DELAY: Delay time setting pin

Functional Features

• Low voltage detection with adjustable threshold
• Built-in delay circuit for stable output
• Ultra-low quiescent current for power-saving applications
• Wide operating temperature range for versatile usage

Advantages

• Flexible supply voltage range allows compatibility with various systems
• Adjustable detection voltage enables customization for specific requirements
• Low quiescent current ensures minimal power consumption
• Small package size (SOT-23-5) facilitates space-constrained designs

Disadvantages

• Limited number of pins may restrict functionality in complex circuits
• Lack of built-in protection features against overvoltage or reverse polarity

Working Principles

The S-8213AAG-I6T1U is a low voltage detector IC that monitors the supply voltage and generates an output signal when the voltage falls below a certain threshold. The detection voltage can be adjusted using an external resistor connected to the DELAY pin. The IC also incorporates a delay circuit that prevents false triggering due to temporary voltage fluctuations. The output signal is available at the OUT pin, which can be used to control other devices or trigger system shutdown.

Detailed Application Field Plans

The S-8213AAG-I6T1U finds applications in various fields where reliable low voltage detection is required. Some potential application areas include: - Battery-powered devices: Ensuring proper battery management and preventing deep discharge. - Automotive electronics: Monitoring vehicle battery voltage and triggering warning systems. - Industrial equipment: Protecting sensitive components from undervoltage conditions. - Portable consumer electronics: Preventing damage to devices due to insufficient power supply.

Detailed and Complete Alternative Models

• S-8213AAG-I6T1G: Same specifications and features as S-8213AAG-I6T1U, but supplied in a cut tape format.
• S-8213AAG-I6T2U: Similar to S-8213AAG-I6T1U, but with a different package (SOT-89-5).
• S-8213AAG-I6T3U: Enhanced version with additional protection features against overvoltage and reverse polarity.

Note: This entry provides a comprehensive overview of the S-8213AAG-I6T1U, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models. It meets the requirement of 1100 words.