S-8211CDA-I6T1U

Product Overview

Category

S-8211CDA-I6T1U belongs to the category of voltage detectors and reset ICs.

Use

This product is primarily used for monitoring and controlling voltage levels in electronic circuits.

Characteristics

• Voltage detection range: 0.8V to 6.0V
• Low quiescent current: 1.0µA (typ.)
• Built-in delay circuit
• Small package size: SOT-23-5
• RoHS compliant

Package and Quantity

The S-8211CDA-I6T1U is packaged in a SOT-23-5 package. It is available in quantities of [insert quantity].

Essence

The essence of the S-8211CDA-I6T1U lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

The S-8211CDA-I6T1U is packaged in a SOT-23-5 package. It is available in quantities of [insert quantity].

Specifications

• Input voltage range: 0.8V to 6.0V
• Quiescent current: 1.0µA (typ.)
• Operating temperature range: -40°C to +85°C
• Output type: Open-drain
• Delay time: [insert value] ms (typ.)

Detailed Pin Configuration

The S-8211CDA-I6T1U has the following pin configuration:

1. VDD: Power supply input
2. GND: Ground reference
3. OUT: Open-drain output
4. EN: Enable pin for controlling the device
5. DELAY: Delay time setting pin

Functional Features

• Accurate voltage detection within the specified range
• Built-in delay circuit for stable operation
• Open-drain output for easy integration with other circuits
• Low quiescent current for power efficiency
• Enable pin for controlling the device's operation

Advantages and Disadvantages

Advantages

• Accurate voltage detection
• Small package size for space-constrained applications
• Low quiescent current for power efficiency
• Built-in delay circuit for stable operation

Disadvantages

• Limited voltage detection range (0.8V to 6.0V)
• Open-drain output may require additional circuitry for certain applications

Working Principles

The S-8211CDA-I6T1U operates by continuously monitoring the input voltage level. When the voltage falls below a certain threshold, it triggers the built-in delay circuit. After the specified delay time, the open-drain output is activated, providing a reset signal to the connected circuitry. The enable pin can be used to control the device's operation.

Detailed Application Field Plans

The S-8211CDA-I6T1U finds applications in various electronic systems where accurate voltage monitoring and reset functionality are required. Some potential application fields include:

1. Battery-powered devices: Ensuring proper voltage levels in portable electronics.
2. Automotive systems: Monitoring voltage in vehicle electrical systems.
3. Industrial automation: Resetting control circuits in case of voltage fluctuations.
4. Power management: Controlling power supply based on voltage levels.

Detailed and Complete Alternative Models

1. S-8211CAA-I6T1U: Similar to S-8211CDA-I6T1U but with a different package (SOT-89-5).
2. S-8211CAB-I6T1U: Higher voltage detection range (1.8V to 6.0V) compared to S-8211CDA-I6T1U.
3. S-8211CDC-I6T1U: Lower quiescent current (0.5µA) and smaller package size (SOT-23-4).

These alternative models offer similar functionality with slight variations in specifications and package options.

Word count: [insert word count]