ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-8211CAP-M5T1U
詳細を表示 DataSheets

S-8211CAP-M5T1U

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Power management
  • Characteristics: Low dropout voltage, low quiescent current, small package size
  • Package: SOT-23-5
  • Essence: Linear voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Output Current: 150mA (maximum)

Detailed Pin Configuration

The S-8211CAP-M5T1U has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. CE: Chip enable pin 4. VOUT: Output voltage pin 5. NC: No connection pin

Functional Features

  • Low dropout voltage ensures stable output even with low input voltage.
  • Low quiescent current minimizes power consumption during standby mode.
  • Small package size allows for space-saving designs.

Advantages and Disadvantages

Advantages: - Wide input voltage range provides flexibility in various applications. - High output current capability supports powering multiple components. - Low quiescent current prolongs battery life in portable devices.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Dropout voltage may cause a slight decrease in efficiency.

Working Principles

The S-8211CAP-M5T1U is a linear voltage regulator that regulates the output voltage based on the difference between the input and desired output voltage. It utilizes a pass transistor to control the output voltage by adjusting the resistance between the input and output.

Detailed Application Field Plans

The S-8211CAP-M5T1U is commonly used in various electronic devices, including: 1. Mobile phones 2. Portable media players 3. Digital cameras 4. Wearable devices 5. IoT devices

Detailed and Complete Alternative Models

  1. S-8211CAA-M5T1U: Similar specifications but with a different package (SOT-23-5).
  2. S-8211CAB-M5T1U: Higher output current capability (300mA) but with a slightly higher dropout voltage.
  3. S-8211CAD-M5T1U: Lower quiescent current (10µA) but with a narrower input voltage range (2.7V to 5.5V).

Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's datasheet for a complete list.

Word count: 314 words

技術ソリューションにおける S-8211CAP-M5T1U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-8211CAP-M5T1U in technical solutions:

Q1: What is S-8211CAP-M5T1U? A1: S-8211CAP-M5T1U is a voltage detector IC (integrated circuit) that monitors the voltage level of a power supply and provides an output signal when the voltage falls below a certain threshold.

Q2: What is the operating voltage range of S-8211CAP-M5T1U? A2: The operating voltage range of S-8211CAP-M5T1U is typically between 0.8V and 6.0V.

Q3: How does S-8211CAP-M5T1U detect voltage levels? A3: S-8211CAP-M5T1U uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage drops below this threshold, it triggers an output signal.

Q4: Can S-8211CAP-M5T1U be used in battery-powered applications? A4: Yes, S-8211CAP-M5T1U is commonly used in battery-powered applications to monitor the battery voltage and provide low-battery warnings or trigger actions when the battery voltage is too low.

Q5: What is the typical quiescent current consumption of S-8211CAP-M5T1U? A5: The typical quiescent current consumption of S-8211CAP-M5T1U is very low, usually around 1µA, making it suitable for power-sensitive applications.

Q6: Can S-8211CAP-M5T1U be used in automotive applications? A6: Yes, S-8211CAP-M5T1U is designed to meet automotive standards and can be used in various automotive applications, such as monitoring the battery voltage in vehicles.

Q7: Does S-8211CAP-M5T1U have any built-in protection features? A7: Yes, S-8211CAP-M5T1U has built-in overvoltage protection, reverse voltage protection, and a hysteresis function to prevent false triggering and ensure reliable operation.

Q8: What is the output configuration of S-8211CAP-M5T1U? A8: S-8211CAP-M5T1U provides an open-drain output, which means it can be connected to other devices or microcontrollers with pull-up resistors to achieve the desired logic level.

Q9: Can S-8211CAP-M5T1U be used in industrial control systems? A9: Yes, S-8211CAP-M5T1U is suitable for industrial control systems where monitoring power supply voltages is crucial for ensuring proper operation and preventing damage.

Q10: Is S-8211CAP-M5T1U available in different package options? A10: Yes, S-8211CAP-M5T1U is available in various package options, including SOT-23-5 and USP-6C, providing flexibility for different application requirements.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications of S-8211CAP-M5T1U.