S-80948CLNB-G7JT2U

Product Overview

Category

S-80948CLNB-G7JT2U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.6V to 5.0V
• Low supply current: 1.0μA (typical)
• High accuracy: ±1.0%
• Built-in delay circuit
• Small package size: SOT-23-5
• RoHS compliant

Package and Quantity

The S-80948CLNB-G7JT2U is packaged in a SOT-23-5 package. Each package contains one unit of the IC.

Specifications

• Supply voltage range: 1.6V to 5.5V
• Operating temperature range: -40°C to +85°C
• Output type: N-channel open-drain
• Output voltage: VOUT = VDD - 0.1V (max)
• Quiescent current: IQ = 1.0μA (typical), 2.0μA (max)

Detailed Pin Configuration

The S-80948CLNB-G7JT2U has five pins arranged as follows:

```

---

| | --| |-- |____| | | |__| ```

Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: RESET (Reset Output) Pin 4: MR (Manual Reset Input) Pin 5: VOUT (Voltage Detection Output)

Functional Features

• Voltage detection with high accuracy
• Built-in delay circuit for stable output
• Manual reset function for system control
• Low supply current for power efficiency
• Open-drain output for flexibility in circuit design

Advantages and Disadvantages

Advantages: - Wide voltage detection range - High accuracy - Small package size - Low power consumption

Disadvantages: - Limited to N-channel open-drain output - No built-in overvoltage protection

Working Principles

The S-80948CLNB-G7JT2U operates by comparing the input voltage with a reference voltage. When the input voltage falls below the detection threshold, the reset output is activated. The built-in delay circuit ensures stable output during power-on or power-off transitions.

Detailed Application Field Plans

The S-80948CLNB-G7JT2U can be used in various applications, including but not limited to: - Battery-powered devices - Microcontrollers - Power management systems - Consumer electronics - Industrial automation

Detailed Alternative Models

1. S-80948CLNB-G7JT2U: The base model with standard specifications.
2. S-80948CLNB-G7JT2U-T2: Same as the base model, but with extended temperature range (-40°C to +105°C).
3. S-80948CLNB-G7JT2U-R: Same as the base model, but with an active-low reset output.

These alternative models provide options based on specific requirements and operating conditions.

In conclusion, the S-80948CLNB-G7JT2U is a versatile integrated circuit used for voltage detection and reset functions. Its high accuracy, low power consumption, and small package size make it suitable for a wide range of applications. However, it is important to consider its limitations, such as the output type and lack of overvoltage protection.