S-80922CNPF-G8STFG belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80922CNPF-G8STFG is available in a small surface-mount package, specifically the SOT-23-5 package.
The essence of this product lies in its ability to accurately detect voltage levels and provide a reset signal when necessary, ensuring proper operation of electronic devices.
The S-80922CNPF-G8STFG is typically packaged in reels, with 3,000 units per reel.
The S-80922CNPF-G8STFG has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: VOUT (Reset Output) Pin 4: VDET (Voltage Detection Input) Pin 5: NC (No Connection)
The S-80922CNPF-G8STFG operates based on a voltage divider network connected to the VDET pin. When the input voltage exceeds the set threshold, the internal comparator activates the reset output. This signal remains active until the input voltage rises above the threshold again.
The S-80922CNPF-G8STFG finds applications in various electronic devices that require voltage monitoring and reset functionality. Some potential application fields include:
These alternative models offer similar functionality and characteristics, providing flexibility for different design requirements.
Word count: 554 words
Sure! Here are 10 common questions and answers related to the application of S-80922CNPF-G8STFG in technical solutions:
1. What is the S-80922CNPF-G8STFG? - The S-80922CNPF-G8STFG is a voltage detector IC (integrated circuit) manufactured by a specific company.
2. What is the purpose of the S-80922CNPF-G8STFG? - The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.
3. What is the operating voltage range of the S-80922CNPF-G8STFG? - The operating voltage range of this IC is typically between X volts and Y volts.
4. How does the S-80922CNPF-G8STFG work? - This IC works by comparing the input voltage with a reference voltage and providing an output signal when the input voltage crosses a certain threshold.
5. What is the output format of the S-80922CNPF-G8STFG? - The output format of this IC can be either an active low or active high signal, depending on the specific variant.
6. What is the typical response time of the S-80922CNPF-G8STFG? - The typical response time of this IC is usually in the range of a few microseconds.
7. Can the S-80922CNPF-G8STFG be used in automotive applications? - Yes, this IC is suitable for automotive applications as it meets the required standards and specifications.
8. Is the S-80922CNPF-G8STFG available in different package options? - Yes, this IC is available in various package options such as SOP-4, SOT-23-5, etc.
9. What is the maximum operating temperature of the S-80922CNPF-G8STFG? - The maximum operating temperature of this IC is typically around Z degrees Celsius.
10. Can the S-80922CNPF-G8STFG be used in battery-powered applications? - Yes, this IC can be used in battery-powered applications as it has low power consumption and operates within a wide voltage range.
Please note that the specific details mentioned in the answers may vary depending on the actual specifications of the S-80922CNPF-G8STFG IC.