画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-24C04DI-A8T1U5

S-24C04DI-A8T1U5

Overview

Product Category

S-24C04DI-A8T1U5 belongs to the category of electronic memory devices.

Use

This product is primarily used for data storage and retrieval in various electronic systems.

Characteristics

  • Non-volatile memory: The S-24C04DI-A8T1U5 retains stored data even when power is disconnected.
  • High storage capacity: This device can store up to 4 kilobits (512 bytes) of data.
  • Low power consumption: The S-24C04DI-A8T1U5 operates efficiently, consuming minimal power.
  • Compact package: It comes in a small form factor, making it suitable for space-constrained applications.

Package and Quantity

The S-24C04DI-A8T1U5 is packaged in a surface-mount 8-pin SOIC (Small Outline Integrated Circuit) package. It is typically sold in reels containing multiple units.

Specifications

  • Memory Capacity: 4 kilobits (512 bytes)
  • Interface: I2C (Inter-Integrated Circuit)
  • Supply Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Minimum 200 years
  • Write Endurance: 1 million write cycles

Pin Configuration

The S-24C04DI-A8T1U5 has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | A0 | Address Input Bit 0 | | 2 | A1 | Address Input Bit 1 | | 3 | GND | Ground | | 4 | SDA | Serial Data Input/Output | | 5 | SCL | Serial Clock Input | | 6 | WP | Write Protect | | 7 | VCC | Supply Voltage | | 8 | NC | No Connection |

Functional Features

  • Random Access: The S-24C04DI-A8T1U5 allows direct access to any memory location, enabling efficient data retrieval.
  • Byte-level Read/Write: It supports individual byte read and write operations, providing flexibility in data manipulation.
  • Hardware Write Protection: The WP pin can be used to protect the memory from accidental writes, ensuring data integrity.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • Compact package size enables integration into space-constrained designs.
  • Low power consumption prolongs battery life in portable devices.
  • High endurance allows for frequent write operations without compromising reliability.

Disadvantages

  • Limited storage capacity compared to higher-capacity memory devices.
  • Slower data transfer rate compared to some other memory technologies.
  • Relatively higher cost per kilobit compared to larger memory chips.

Working Principles

The S-24C04DI-A8T1U5 utilizes I2C communication protocol for interfacing with the host system. It consists of a memory array organized into 512 bytes, each with a unique address. Data is written or read by sending appropriate commands and addresses through the serial interface (SDA and SCL pins). The device operates on a supply voltage between 1.7V and 5.5V, allowing compatibility with various systems.

Detailed Application Field Plans

The S-24C04DI-A8T1U5 finds applications in a wide range of electronic systems, including but not limited to: - Consumer electronics: Used for storing configuration settings, user preferences, and small data sets in devices such as TVs, audio players, and remote controls. - Industrial automation: Employed for data logging, parameter storage, and system configuration in industrial control systems. - Automotive electronics: Utilized for storing critical information like calibration data, fault codes, and vehicle settings in automotive modules. - Medical devices: Used for storing patient data, device configurations, and firmware updates in medical equipment.

Alternative Models

There are several alternative models available in the market that offer similar functionality to the S-24C04DI-A8T1U5. Some notable alternatives include: - AT24C04 from Atmel - CAT24C04 from ON Semiconductor - M24C04 from STMicroelectronics - 24AA04 from Microchip Technology

These alternative models may vary in terms of package type, operating voltage range, and additional features, providing options to suit specific application requirements.

In conclusion, the S-24C04DI-A8T1U5 is a compact, non-volatile memory device with a capacity of 4 kilobits. It offers random access, low power consumption, and hardware write protection. While it has limitations in terms of storage capacity

技術ソリューションにおける S-24C04DI-A8T1U5 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-24C04DI-A8T1U5 in technical solutions:

Q1: What is S-24C04DI-A8T1U5? A1: S-24C04DI-A8T1U5 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) that has a capacity of 4 kilobits.

Q2: What are the typical applications of S-24C04DI-A8T1U5? A2: S-24C04DI-A8T1U5 is commonly used in various electronic devices such as consumer electronics, automotive systems, industrial equipment, and communication devices for storing small amounts of non-volatile data.

Q3: How does S-24C04DI-A8T1U5 connect to a microcontroller or other devices? A3: S-24C04DI-A8T1U5 uses an I2C (Inter-Integrated Circuit) interface for communication. It requires two lines - SDA (Serial Data) and SCL (Serial Clock) - to connect to the microcontroller or other devices.

Q4: What is the operating voltage range of S-24C04DI-A8T1U5? A4: S-24C04DI-A8T1U5 operates within a voltage range of 1.7V to 5.5V.

Q5: How many bytes can be stored in S-24C04DI-A8T1U5? A5: S-24C04DI-A8T1U5 has a total capacity of 512 bytes, which is equivalent to 4 kilobits.

Q6: Can S-24C04DI-A8T1U5 be reprogrammed? A6: Yes, S-24C04DI-A8T1U5 is an EEPROM, which means it can be electrically erased and reprogrammed multiple times.

Q7: What is the maximum operating frequency of S-24C04DI-A8T1U5? A7: The maximum operating frequency of S-24C04DI-A8T1U5 is typically 400 kHz.

Q8: Does S-24C04DI-A8T1U5 have any built-in security features? A8: No, S-24C04DI-A8T1U5 does not have any built-in security features. It is a standard EEPROM without additional security measures.

Q9: Can S-24C04DI-A8T1U5 operate in extreme temperature conditions? A9: Yes, S-24C04DI-A8T1U5 is designed to operate within a wide temperature range, typically from -40°C to +85°C.

Q10: Are there any specific precautions to consider when using S-24C04DI-A8T1U5? A10: It is important to follow the manufacturer's datasheet and guidelines for proper handling, voltage levels, and timing requirements. Additionally, care should be taken to avoid exceeding the maximum ratings specified for voltage, current, and temperature.