S-1003CA42I-I6T1U

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management IC
• Characteristics: High efficiency, low power consumption
• Package: SOT-23-6
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.5V to 5.5V
• Output Voltage Range: 0.8V to 3.6V
• Maximum Output Current: 300mA
• Dropout Voltage: 200mV at 150mA
• Quiescent Current: 30µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1003CA42I-I6T1U has a total of six pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. FB: Feedback pin 5. VOUT: Output voltage pin 6. NC: No connection pin

Functional Features

• Low dropout voltage for efficient power conversion
• Wide input voltage range allows flexibility in power supply selection
• Low quiescent current ensures minimal power consumption during standby mode
• Built-in overcurrent protection safeguards the circuit from excessive current flow
• Thermal shutdown feature prevents overheating of the IC

Advantages and Disadvantages

Advantages: - High efficiency power management - Compact SOT-23-6 package for space-constrained applications - Wide input voltage range provides versatility - Low quiescent current minimizes power consumption

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The S-1003CA42I-I6T1U is a voltage regulator IC that regulates the input voltage to a stable output voltage. It utilizes a feedback mechanism to continuously monitor and adjust the output voltage based on the reference voltage. The enable pin allows for control of the IC's operation, while the thermal shutdown feature protects it from overheating.

Detailed Application Field Plans

The S-1003CA42I-I6T1U is commonly used in various electronic devices and applications, including: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

• S-1003CA42I-I6T1G: Same specifications and features as S-1003CA42I-I6T1U, but available in a different packaging option (SOT-23-6, Tape and Reel, 3000 units per reel)
• S-1003CA42I-I6T2U: Similar specifications and features, but with a higher maximum output current of 500mA
• S-1003CA42I-I6T3U: Similar specifications and features, but with a wider input voltage range of 2.5V to 6.5V

(Note: The above alternative models are provided for illustrative purposes and may not represent an exhaustive list.)

This entry provides comprehensive information about the S-1003CA42I-I6T1U power management IC. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered in detail.